Copper Clad

Copper Clad

Security line switch 15V DC 20 Watt lines?

The switch was bad in my chopper and the cable around. Works Fine other than the inconvenience of having to plug the connector to use. He bought an "in-line 3A 120VAC switch cable to install the line, but the first precaution is to "Connect only copper or copper clad wire to this device." Both ends of the connector and the late into the processor are sealed. Since I am dealing with a single line of 15V, I wonder if you can go ahead and install warnings cons. Period crusher than ever 5 minutes. I want to know the opinion of an electrician in this configuration. Thank you very much.

In principle, line switch should work fine. Caution is there to protect the installation of a performance aluminum wire (which could be a source of electrolysis). The cable you have there is copper, anyway. The current is not a problem - change is good for 3 amps, 20 Watt 15V line is less than 1.5 amps. The question concerned is that the cable is installed in the switch line is thick enough to contacts switch handle solid wire. If you think this is not a problem, then it is good to go!

Co-Tech May raise prices of Copper Sheet in March 2010 on strong demand for the supplier of copper co-Tech is running at the rate of use high and has received orders for April 2010. The company said it could raise prices for copper sheets in March. The average price Copper fell to 7,300-7,400 U.S. dollars per tonne on March 2 from a peak of U.S. $ 7,500-7,600.